Servonaut SMR Bedienungsanleitung Seite 27

Choose the reversing alarm
remove the jumper
·
turn on the model
·
· the red LED turns on
place the jumper in the right hand position
·
the green LED turns on
·
the SMR now plays the three horn sounds
·
and one short sound one after another
· choose the short sound if you don't want any
reversing alarm at all
to choose your favourite sound, remove the
·
jumper while it is playing
· the red LED turns on again
wait for about 10s before you switch the
·
model power off
place the jumper to the correct equalizer
·
setting again
Troubleshooting
You don't hear anything at all? Please check:
volume poti plugged in correctly and turned
up
loudspeaker connected
operating voltage on
LED doesn't light up? Please check:
operating voltage
correct battery polarity
You don't hear horn or hydraulic sounds?
Please check:
channels connected correctly (blue und
transparent plug may be switched or
plugged in wrong)
Equalizer SM-EQ doesn't adjust the sound?
Please check:
jumper of the SMR is in
position „EQ-on"
LED flashes three times red and then one,
two or three times green?
Internal error! Please contact servonaut for
further information
Manual SMR 27