OHAUS Catapult 5000 Serie Gebrauchsanleitung Seite 27

CATAPULT 5000 SERIES SCALES
3.8.3 Parity
Set the data bits and parity.
7 EVEN = 7 data bits, even parity.
7 Odd = 7 data bits, odd parity.
7 NONE = 7 data bits, no parity.
8 NONE = 8 data bits, no parity.
3.8.4 Stop Bit
Set the number of stop bits.
1 = 1 stop bit.
2 = 2 stop bits.
3.8.5 Handshake
Set the flow control method.
NONE = no handshaking.
ON-OFF = XON/XOFF software handshaking.
3.8.6 Stable Only
Set the print criteria.
OFF = values are printed immediately.
ON = values are only printed when the stability criteria are met.
3.8.7 Auto Print
Set the automatic printing functionality.
OFF
= disabled.
ON.StAb
= printing occurs each time the stability criteria are met.
INtEr
= printing occurs at the defined interval.
CONt
= printing occurs continuosly.
When INtEr is selected, set the Print Interval.
1 to 3600 (seconds)
EN-21