HP PageWide XL Serie Einführende Informationen Seite 11

If the printer is left idle for some time, it goes into sleep mode and switches off the
front-panel display.
To change the time that elapses before sleep mode, tap
options > Printer sleep.
The printer can be woken from sleep mode by pressing the power key, sending a
print job, inserting a page in the scanner (MFPs only), opening a door or a drawer, or
installing/uninstalling the high-capacity stacker.
Front-panel error codes
The printer may occasionally display a system error, which consists of a numerical
code of 12 digits followed by the recommended action that you should take.
In most cases you will be asked to restart the printer, because when the printer
starts it can diagnose the issue better and may be able to fix it automatically. If the
problem persists after restarting, you should contact your service representative
and be ready to give the numerical code from the error message.
If the error message contains some other recommended action, follow the
printer's instructions.
Printer specifications
Power, environmental, physical and acoustic specifications are listed.
Power specifications
Use the electrical cord supplied with the printer and the power supply voltage
specified on the label. Avoid overloading the printer's electrical outlet with multiple
devices.
HP PageWide XL Pro
10000/8000 MFP
HP PageWide XL 8000
Printer
HP PageWide XL Pro 5200
Input voltage
~200–240 V ± 10%
Two wires + PE
~200–240 V ±10%
Two wires + PE
~100–127/200–240 V ±10%
Two wires + PE
, then System > Power
Input Maximum
frequency load
current
50/60 Hz 8 A
50/60 Hz 8 A
50/60 Hz 10/5 A
Power specifications
Power
consumption
(printing)
1.2 kW
1.2 kW
0.9 kW
9