Get Started; Choose An Option For Setting Up Your Printer - HP Smart Tank 5100 Serie Einrichtungs- & Benutzerhandbuch

Get Started

1 Remove packaging and power on
1. Remove all the tape and packing materials.
Note: Keep the packaging materials for repacking
in case you need to move the printer.
2

Choose an option for setting up your printer

Recommended
Option 1: Guided setup with HP Smart
1. Go to 123.hp.com on a mobile device or computer to install the HP Smart software.
2. Open HP Smart. If prompted, create or sign in to an HP account.
3. On the Home screen, choose the option to add a printer, and follow the instructions to connect the printer to your
network (only 2.4 GHz Wi-Fi supported).
4. V iew animations to fill ink tanks, install printheads, load paper, and perform printheads alignment in HP Smart.
HP Smart has everything you need to finish setup.
Option 2: Manual setup
Follow illustrations in this guide to set up the hardware, then use the HP Smart software to connect to Wi-Fi
and finish setup.
123.hp.com
1
2 3
1 2 3
2. O pen the scanner lid and remove the film.
Close the scanner lid and front door.
3. Plug in and power on the printer.
Keep the printer on during setup.
1
2 3
1 2 3
3