Endress+Hauser CYK10 Betriebsanleitung Seite 30

Electrical connection
Screw the housing of the junction box directly on the wall or on the securing plate. The
securing plant can be used as a drilling template.
5.2 Mounting the CYK11 junction box on a pipe
Always mount the junction box in such a way that the cable is fed in from below.
1. Screw the housing to the securing plate. This makes it possible to secure the box to
horizontal or vertical pipes.
2. Bend the loops on the securing plate to match the approximate diameter of the
retaining pipe. Secure the hose clip on the pipe and fix the loops under the clip.
 4 Pipe mounting with securing plate
6 Electrical connection
WARNING
L
Device is live
Incorrect connection may result in injury or death
‣
The electrical connection may be performed only by an electrical technician.
‣
The electrical technician must have read and understood these Operating Instructions and
must follow the instructions contained therein.
‣
Prior to commencing connection work, ensure that no voltage is present on any cable.
30
A0031081
Endress+Hauser