Endress+Hauser CYK10 Betriebsanleitung Seite 26

Incoming acceptance and product identification
2. Verify that the contents are undamaged.
 Notify your supplier of any damage to the delivery contents.
Keep the damaged products until the matter has been settled.
3. Check the delivery for completeness.
 Check it against the delivery papers and your order.
4. Pack the product for storage and transportation in such a way that it is protected
against impact and moisture.
 The original packaging offers the best protection.
The permitted ambient conditions must be observed (see "Technical data").
If you have any questions, please contact your supplier or your local sales center.
3.2 Product identification
3.2.1 Nameplate
The nameplate provides you with the following information on your device:
• Manufacturer identification
• Order code
• Serial number
• Safety information and warnings
‣
Compare the data on the nameplate with your order.
3.2.2 Certificates and approvals
Declaration of conformity
This Endress+Hauser Declaration of Conformity serves to guarantee that the product complies
with the requirements of European Directive 2014/30/EU relating to electromagnetic
compatibility and ATEX Directive 2014/34/EU. Compliance is verified by adherence to the
standards listed in the Declaration of Conformity.
Approvals
IECEx
Ex ia IIC T3/T4/T6 Ga
ATEX
ATEX II 1G Ex ia IIC T3/T4/T6 Ga
FM/CSA
IS/NI CLI Div1&2 GP ABCD
NEPSI
II 1G Ex ia IIC T3/T4/T6 Ga
26 Endress+Hauser