Pipe Installation - Endress+Hauser CYK10 Betriebsanleitung

All manuals and user guides at all-guides.com
CYK10/11

Pipe installation

The junction box must be installed such that the cables are introduced from below.
1. Screw the housing onto the mounting plate. It is possible to attach to horizontal or vertical pipes.
2. Bend the tabs on the mounting plate to the approximate diameter of the pipe. Attach the hose
clamp to the pipe and clip the tabs under the clamp.
Endress+Hauser
Pipe installation with mounting plate
a0016244
Wiring
31