RADEMACHER 1423 30 11 Betriebs- Und Montageanleitung Seite 74

i
11. Drawing in and fastening the belt
4.
Next, draw-in the belt into the RolloTron Swivel Winder
Standard DuoFern from the top.
Feed the belt into the device, as shown in the image,
and slide it over the fastening hooks from below.
5.
Re-insert the mains plug into the socket.
6.
Press the up button until the belt has fully
wound once around the reel.
7.
Pull the belt tight when winding, so that the de ection
roller turns at the same time.
8.
Remove the mains plug again from the socket.
9.
Finally, place the provided reel compartment cover onto
the reel compartment.
74
Belt path
in the device
Pull the belt over the fastening
hooks from below
EN
Reel compartment
cover