Functional Description - RADEMACHER 1423 30 11 Betriebs- Und Montageanleitung

i

5. Functional description

The RolloTron Swivel Winder Standard DuoFern is an
electric roller shutter belt winder designed for use inside.
The unit is installed as a surface-mounted device. The
power supply is provided via the enclosed connecting
cable with a mains plug and a small appliances plug.
Use in the DuoFern network
As soon as you integrate your RolloTron Swivel Winder
Standard DuoFern into a DuoFern network, you can make
use of many functions of the DuoFern sensors and of
controllers such as the HomePilot®.
The DuoFern actuators and transmitters must be
connected to the DuoFern network.
The automatic functions such as automatic timer, dawn
and dusk control, solar functions, etc. are only available
if the RolloTron Swivel Winder Standard DuoFern is op-
erated with a respective controller (e.g. DuoFern manual
central operating unit, HomePilot®, etc.), see page 79.
58
Features and control options:
◆ Manual operation
◆ Switching automatic mode on/o
◆ End point setting
◆ Permanent storage of the settings
◆ Obstacle detection
◆ Overload cut-o
◆ Resetting to the default factory settings (Reset)
EN