Setting automatic operation/Opening time
You can also use your roller shutter drive
in the automatic mode as an alternative
to the manual mode. For this purpose,
you must set at least one switching time.
After setting the desired switching times,
the daily opening and closing of the shut-
ter is fully automatic.
Note
You can change the setting of the swit-
ching times any time. Note that each
new saving deletes the previous setting.
Setting automatic opening
time
Example:
The time now is 8 am.
You want to open the roller
shutter every morning at
8:00 am.
1.
Press UP button + clock
button simultaneously
The indicator light flashes
twice briefl y, the roller shut-
ter moves up to the top end
stop. Then, the automatic
system is switched on and
the indicator light is on.
Your roller shutter now au-
tomatically opens every
morning at 8:00 am.
15