Dell PowerEdge R420xr Installationshandbuch Seite 8

Figure 1-2. Installing the PERC Battery Clip
1 screw on the PERC battery clip
3 PERC battery assembly
Replacing the System Board Lock
1 Open the system.
2 Locate the system board lock. See Figure 1-1.
3 Pressing down on the black tab, slide the existing system board lock in the
direction of the arrow as shown in Figure 1-3.
6
Installation Guide
PERC battery clip (DPN: 5C6HG)
2
4 connector on system board