Dell PowerEdge R420xr Installationshandbuch Seite 5

Introduction
This document describes the procedure for installing the components in the
901D reinforcement kit on Dell PowerEdge R420xr systems.
WARNING:
expose you to a risk of electric shock.
CAUTION:
Many repairs may only be done by a certified service technician.
You should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the product.
Contents of 901D Reinforcement Kit
Item No.
Electrical insulator
Screw
Screw
Screw
Bracket assembly
Plastic block
System board lock
PSU lock bracket
PCe card support
bracket
Battery clip
Server tie wrap
Instruction manual
Opening or removing the system cover when the system is on may
Dell Part Description
Number
(DPN)
0M4XF INSUL,MYLAR,PCI BRKT,R2,R420,X
23FYT SCR,M2.5X.45X4MM,FLH,PH,CSKT,Z 6
VW2J4 SCR,4-20X3/8,TORX,TF,SS,PLST,X
JNG28 SCR,4-40X7MM,PH,PHH,ZPS,XR
FYGC8 ASSY,BRKT,PCI-LOCK,R2,R420,XR
TGNK5 BRKT,BLOCK,PCI-LOCK,R1,R420,XR
V5PYK CLP ,PLSTC,PCI-CARD,R420XR
X23KY BRKT,PSU,RET,1U,R420,XR,OEM
T621V BRKT,PCI-LOCK,R1,R420,XR
5C6HG CLP ,PLSTC,BATTERY,R420XR
6N5P9 STRAP ,CBL,6,TIE-WRAP ,RMVBL,XR
8JK58 ASSEMBLY INSTRUCTION
Installation Guide
Quantity
1
1
3
1
1
1
1
1
2
6
1
3