Bosch Indego 350 Originalbetriebsanleitung Seite 28

OBJ_BUCH-3008-002.book Page 28 Friday, December 2, 2016 12:09 PM
28 | English
Settings Sub-menu 1
Security
Settings
Date & Time
Language
Info
Advanced
Tools
* Only Indego 350/400 (available via the app for Connect models)
F 016 L81 221 | (2.12.16)
Sub-menu 2 Explanation
Autolock
On PIN code is required for reactivation after auto-lock and safety
shut-down.
Off Buttons are always ready for input
Change PIN Changing of a PIN code needs entering of existing PIN code first
Alarm
On Alarm is activated
Off Alarm is deactivated and it will not sound
Change time and date
Change display language
System Status Information on Connectivity signal strength, battery charge, sys-
tem information and operating and charging time for the mower
Error Log History of errors held by the mower
Wire ID Change wire ID when possible interference nearby
Lawn Condition Select between Uneven, Normal and Slippery. Mower bump sen-
sor will become more or less sensitive depending on lawn condi-
tion selected.
Remap It will delete the current map
Factory Reset Reset of the machine to factory setting will delete all personal set-
tings (not PIN).
After a factory reset the mower will need to map the garden
Level Information about the ground angle of the mower. When mower in
dock, if dot out of radar then position in a different flat location
Wire Signal Detects the signal received from the perimeter wire
Bosch Power Tools