Mennekes 96438 Montage & Betriebsanleitung Seite 34

1
Swivel open the upper enclosure section
• Slightly pull the upper enclosure section (1) forwards and
swivel it open.
6.3.6 Mounting the device
Caution
Risk of sustaining injury due to heavy device
During transportation or installation work, heavy
devices may fall down and cause injury.
• Transport, mount and dismount heavy devices with the
aid of a second person if needed.
• Use appropriate auxiliary equipment as required.
Mounting the device
12
• Position the device above the fastening holes on the wall.
• Insert the fastening screws through the tapped holes (1) of
the lower enclosure section, and tighten them.
• Check that the device is securely placed.
6.3.7 Connecting the device
Switching off the supply voltage
Danger
Risk of sustaining injury due to electric shock
There is a risk of sustaining major injury or death when
working on or with live components.
• De-energise the supply line to the device prior to
commencing installation tasks.
• Secure the de-energised supply voltage connection point
against inadvertent reactivation by other persons.
• Check that the supply line is de-energised prior to
commencing installation tasks.
Laying and connecting the supply line
1
Connecting the supply line
• Remove the jacket of the supply line so that the required
length is reached.
• Guide the supply line (1) through the cable gland (2) into
the housing.
3
2
1