Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6. Installation and Start-Up
The activities described in this chapter may only
be carried out by a qualified electrician!
Danger
Risk of sustaining injury due to electric shock
A risk of sustaining major injury or death is associated
with the improper handling of electrotechnical devices
and equipment.
The tasks described below may only be carried out by a
qualified electrician.
• Only carry out the tasks described below, if you are
a qualified electrician or possess the appropriate
knowledge and skills.
Warning
Risk of sustaining injury due to fire
There is risk of fire which may cause injury should the
device be connected to a supply line whose cross-section
is insufficient and/or is not adequately protected by a
fuse.
• Use an adequate fuse and a supply line with a sufficient
cross-section for the device.
Attention
Material damage due to insufficient cross-section
and/or inadequate fuse
There is a risk of overloading the device and subsequently
causing damage to the device should it be connected to a
supply line whose cross-section is insufficient and/or is not
adequately protected by a fuse.
• Use an adequate fuse and a supply line with a sufficient
cross-section for the device.
• Comply with the specifications given on the rating plate
and in the "Connected loads" chapter.
Ö
Please refer to the "Technical Data" chapter
6.1
Unpacking the device
Unpacking the device
• Do not use sharp or pointed objects for opening the
package to avoid damage to the device.
• Open the package and take out the device (1).
• Store the package or dispose of it in accordance with
applicable regulations.
6.2
Checking the device for damage sus-
tained during transportation
• Check the device for damage sustained during
transportation.
• Do not use a device that is damaged.
• If necessary, contact your specialist dealer.
EN
EN
1
EN
EN
NL
NL
FR
FR
IT
IT
9
Werbung
