Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Regarding this document
© Copyright MENNEKES Elektrotechnik GmbH & Co. KG
This document is protected by copyright.
The contents of this document is the property of
MENNEKES Elektrotechnik GmbH & Co. KG and may not be
duplicated or reproduced, in whole or in part, without the
prior consent of the copyright holder.
Safety-related symbols
Danger
This warning indicates imminent danger. Failure to
observe this warning will result in death or major injury.
Warning
This warning indicates a potentially hazardous situation.
Failure to observe this warning can result in death or
major injury.
Caution
This warning indicates a potentially hazardous situation.
Failure to observe this warning can result in light or minor
injuries.
Attention
This warning indicates a potentially hazardous situation.
Failure to observe this warning may result in material
damage to the device.
General information
This note indicates additional, useful information on a
given topic.
Symbols used
• Required action
– List
Ö
Cross-reference to another passage in the document
2
Table of Contents
1.
General Information ............................................ 4
1.1 Contact details .................................................... 4
2.
For your Safety .................................................... 4
2.1
Intended use ..................................................... 4
2.2 Target groups ...................................................... 5
2.2.1 Qualified electrician ........................................ 5
2.2.2 Owner / user .................................................. 5
2.3 Foreseeable misuse .............................................. 5
3.
Residual Risks ....................................................... 6
3.1 Danger due to condensed water ......................... 6
3.2 Fire hazard due to heat accumulation .................. 6
3.3 Danger due to improper operation ...................... 6
4.
Device Structure ................................................... 7
5.
Assembly variants ............................................... 8
6.
Installation and Start-Up ..................................... 9
6.1 Unpacking the device .......................................... 9
6.2 Checking the device for damage sustained during
transportation ................................................... 9
6.3 Installing the device ........................................... 10
6.3.1 Installation height ......................................... 10
6.3.2 Opening the cable entry ............................... 10
6.3.3 Selection of fastening elements .................... 10
6.3.4 Production of fastening holes ....................... 11
6.3.5 Opening the device ...................................... 11
6.3.6 Mounting the device .................................... 12
6.3.7 Connecting the device .................................. 12
6.3.8 Checking the connection of the supply line .. 13
6.3.9 Closing the device ........................................ 13
6.3.10 Checking the socket connection ................... 13
7.
Operation ........................................................... 14
7.1 Connecting the consumer ................................. 14
7.1.1 Connecting the consumer to the device accor-
ding to protection class IP 44 ....................... 14
7.1.2 Connecting the consumer with device accor-
ding to protection class IP 67 ....................... 14
7.2 Removing electrical consumers .......................... 15
Werbung
