Herunterladen Diese Seite drucken

JUNO JB040A2 Benutzerinformation Seite 4

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged
appliance.
• Follow the installation instructions supplied
with the appliance.
• Always take care when moving the
appliance as it is heavy. Always use safety
gloves and enclosed footwear.
• Do not pull the appliance by the handle.
• Install the appliance in a safe and suitable
place that meets installation requirements.
• Keep the minimum distance from other
appliances and units.
• Before mounting the appliance, check if
the appliance door opens without restraint.
If not the appliance has to be lifted.
• The appliance is equipped with an electric
cooling system. It must be operated with
the electric power supply.
Cabinet minimum height
(Cabinet under the work‐
top minimum height)
Cabinet width
Cabinet depth
Height of the front of the
appliance
Height of the back of the
appliance
4
ENGLISH
2.2 Electrical connection
590 (600) mm
Risk of fire and electric shock.
• All electrical connections should be made
560 mm
• The appliance must be earthed.
550 (550) mm
• Make sure that the parameters on the
598 mm
579 mm
• Always use a correctly installed
Width of the front of the
appliance
Width of the back of the
appliance
Depth of the appliance
Built in depth of the ap‐
pliance
Depth with open door
Ventilation opening mini‐
mum size. Opening
placed on the bottom
rear side
Mains supply cable
length. Cable is placed
in the right corner of the
back side
Mounting screws
WARNING!
by a qualified electrician.
rating plate are compatible with the
electrical ratings of the mains power
supply.
shockproof socket.
594 mm
558 mm
561 mm
540 mm
1007 mm
560x20 mm
1100 mm
4x25 mm

Werbung

loading