Werbung
Verfügbare Sprachen
Verfügbare Sprachen
IDENTIFICATION OF THE MECHANICAL PARTS
Mounting bracket
Back-focus ring
Back-focus ring
mount fixing screw
"C"-"CS" mount adapter
INSTALLATION SPECIFICATIONS
•
Never install the CCTV camera where it is exposed to rain or moisture. In these cases, use the
specific housings.
•
Avoid pointing the lens directly towards the sun or intense sources of light also when the camera is
off. The subject must not be backlit.
•
Do not point the camera towards reflecting objects.
•
Some lighting systems (e.g. coloured fluorescent lights) may false the colours.
•
In the case of a "C" type lens, insert the adapter ring provided between the CCTV camera and the
lens.
•
When the CCTV camera is used in variable lighting conditions, an Auto-Iris lens must be used.
•
It is advisable to install a suitable sectioning and protection switch ahead of the appliances.
•
Before connecting the power supply, check that the rating data of the power supply match those of
the CCTV camera.
•
THE CCTV CAMERA MUST BE GROUNDED.
The mains cables must be wired according to the following colour coding:
See Urmet Domus "Closed circuit TV technical installation manual" for further information.
DS1092-025
GREEN/YELLOW: ......................................Ground
BLUE:.......................................................... Neutral
BROWN: ...................................................... Phase
BNC crimp connector
Lens mount cap
AUTO-IRIS connector
7
Werbung
