5
Wii
After confirming that the
Nintendo Wi-Fi USB Connector
is ready, select the NEXT option.
6
PC
You should see an icon in your Windows XP or
Windows Vista taskbar for the Nintendo Wi-Fi USB
Connector Regis tration Tool. Double-click on the
icon to launch the tool. It should show all Wii con-
soles in wireless range, listing each by its
Nickname. Select the Wii console that you want to
establish a wireless connection for, then click
GRANT PERMISSION TO CONNECT from the
menu that appears.
7
After you've established
the Wii connection with
the PC, you'll see a NEXT
option appear in the
Wii console's Internet
Setup. Select NEXT.
If the test succeeds, you've completed Internet Setup and your Wii is wirelessly connected. If the test
fails, consult the Troubleshooting section of the manual (page 66).
56
When you see this screen, con-
tinue with setup on the PC-side
described below.
Nintendo Wi-Fi USB Connector
Registration tool icon
8
Select OK to test the
connection.
Internet Setup Selections for Searching for an Access Point
1
Select the CONNECTION
SETTINGS option.
Select an open connection
2
indicated by NONE.
3
Select
WIRELESS CONNECTION.
Select SEARCH FOR
4
AN ACCESS POINT.
If the test succeeds, you've completed Internet Setup and your Wii is wirelessly connected. If the test
fails, consult the Troubleshooting section of the manual (page 66).
5
The Wii console will search
for any identifiable wireless
access points nearby. Select
your access point from the
list. Enter security information
if applicable. See Trouble -
shooting on internet connec-
tions if problems occur
(page 66).
About Connection Setting Lock Icons
You do not need to input an encryption key.
You need to input an encryption key in
order to connect to the internet. Select the
access point to proceed to the Encryption
Key Entry Screen. Enter the required
security information which was registered
for the access point.
Select OK.
6
Select OK to test the
7
connection.
57