Machine - Elmeco First Class Fc1 Gebrauchs- Und Wartungshandbuch

During maintenance and
cleaning, or in case of bad
functioning, disconnect the
machine from the power plug
(by pulling the plug and not the
cable) (pic. 2 and 3 pag.17).
Only specialized and
authorized staff can repair the
machine. Not perfect repairing
can be dangerous for the user.
Contact Elmeco for information
concerning the closer
authorized assistance centre.
M O D E L
H E I G H T
W I D T H
D E P T H
32 kg
W E I G H T
C A P A C I T Y
P O W E R 450 w
V O L T A G E H Z
The Supplier is reserved to bring alterations without notice.
The relevant data the power are indicative. To do reference to the data of plate data restored on the machine.
Installing the new

machine

This machine for the production
of cold drink, slush, and
sherbets the absolute
homogeneity of the product and
the possibility to regulate its
density thanks to an innovative
electronic control. Before
installing the machine, verify
that:
• First Class is not placed by
an heat source;
• The machine has not been
damaged during
transportation. In case of
doubt, contact the supplier;
• The power supply system is
endowed with a grounding
that respects the rules of
law;
• The power supply system
capacity is adequate to the
maximum power of the
machine, as indicated on the
plate (pic. 4 pag.17).
In case of doubt, contact only
qualified staff.
71 lb 54 kg 119 lb
0,61 hp
0,61 hp 900 w
67 kg 148 lb
1200 w 0,61 hp
- 18 -
In order to install the machine,
carefully read the following
instructions.
Warnings
This machine is only for the use
it has been manufactured for.
Any other usage is to be
considered as improper and
dangerous.
Machine description (pic. 1
pag.17):
Top light
•
Transparent tank
•
Auger ring nut
•
Hooks for the tank removal
•
Control electronic board
•
Supply outlet
•
Main switch
•
Pressure switch light
•
Drip tray
•
Plate data
•
Installation
It is suggested that the machine
is installed only by qualified
staff. A wrong installation can
cause damage to people or
things, for which things the
manufacturer declines any
responsibility.
Once the machine is unpacked,
verify the integrity of the
machine. The packaging
elements (plastic bags,
expanded polystyrene, nails,
etc.) must not be left at children
reach as they might be
dangerous.
Remove the protection plastic
stripes also from the internal
side of the grids.