Trouble Shooting And Repair - Volpi PV400 Handbuch

Activate the warranty for your new tool through our website :
https://www.volpioriginale.it/registra-il-tuo-prodotto/
The buyer must also keep a copy of the sales document (receipt, invoice) and of the warranty
registration: a copy of these documents must be given to the Dealer or Authorized Customer Service
together with the machine to be repaired. In the absence of these documents, the machine will in any
case be considered out of warranty.

21. Trouble shooting and repair

Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
Issue
Pruners doesn't
work
Blade becomes hot
Bad cutting surface
Can't charging, red
LED flash
Possible cause
Incorrect connection
Switch fail
Blunt blade
Damaged blade
Insufficient lubrication
Friction force added
Blade is dirty
Blunt blade
Incorrect usage of the pruner
Battery charge is low
Battery not correctly insert in
the charger
Charger not correctly
connected to power
Battery poles are dirty
Battery failure
Charger fail
Solution
Check correct wire connection with
the tool and the battery.
Check the switch to be in ON position.
Send shear to service center for
repairing
Sharp or replace blade
Sharp or replace blade
Lubricate the blade
Lubricate the blade
Clean blade
Sharp or replace blade
Read instruction carefully
Charge the battery
Re-insert the battery to charger
Re-connect the charger
Clean the poles
Replace battery
Replace charger
39