Weidmuller MCP Plus 2 Bedienungsanleitung Seite 33

9 Technical Data
Technical Data MCP Plus 2
Type
Maximum plotting area
Plotting speed
Plotter pens
Data interface
Command language
Device data memory
Drive
Pen store
Addressable resolution
Repeat accuracy
Repeat accuracy on pen change
Power supply
Power supply unit
Environmental conditions
Safety certificates
Interference resistance
Dimensions
Weight
Tab. 9.1 Technical Data MCP Plus 2
4326440000/04/12.2016
Flatbed plotter
422 mm x 305 mm
max. 40 mm/s
Special plotting pens with HP holder
USB 2.0
Based on HP GL 7475A
16 MB
Two-phase stepper motor
max. 4 plotter pens with dual seal
0.01 mm
0.05 mm
0.05 mm with optimal pen
Via external power supply with replaceable adapter
Input voltage 100–240 V AC / 50–60 Hz
Input current max. 0.7 A
Output voltage 24 V DC
Output current max. 1.25 A
Operations 10°C to 35°C
35% to 75% relative humidity
Storage -10°C to 50°C
10% to 90% relative humidity
EN 60950-1:2006 + A11:2009, A1:2010, A12:2011, AC:2011, A2:2013
EN 61000-4-2, 4-4, 4-5, 4-6, 4-11
690 mm x 480 mm x 155 mm
8.3 kg
33