Bosch EasyLevel Originalbetriebsanleitung Seite 32

32 | English
Position the measuring tool with the aluminium sup-
porting surface (2) facing down on the holder. Use the
left magnet (9) (viewed from the front side of the meas-
uring tool) to attach the measuring tool to the metal sur-
face for point operation (16) of the holder.
Horizontally align the upper part of the holder using the
adjusting screw (17) of the holder and the spirit level
for horizontal alignment (4) of the measuring tool. Turn
the upper part of the holder by 90° and repeat the align-
ment.
Laser Goggles (Accessory)
The laser goggles filter out ambient light. This makes the
light of the laser appear brighter to the eye.
Do not use the laser goggles (accessory) as protect-
u
ive goggles. The laser goggles make the laser beam
easier to see; they do not protect you against laser radi-
ation.
Do not use the laser goggles (accessory) as
u
sunglasses or while driving. The laser goggles do not
provide full UV protection and impair your ability to see
colours.
Maintenance and Service
Maintenance and Cleaning
Keep the measuring tool clean at all times.
Never immerse the measuring tool in water or other li-
quids.
Wipe off any dirt using a damp, soft cloth. Do not use any
detergents or solvents.
The areas around the outlet aperture of the laser in partic-
ular should be cleaned on a regular basis. Make sure to
check for lint when doing this.
1 609 92A 8KK | (24.02.2023) Bosch Power Tools