Conceptronic CSATAi23U Version 2.0 Benutzerhandbuch Seite 14

ENGLISH
4.3 Starting a backup
When a backup is configured in chapter 4.2, you can initiate the backup with the backup button on the
CSATAi23U, or with the button 'Start Backup' in the main window of the software.
When the button on the CSATAi23U or in the main window of the software is pressed, the backup software
will start to copy the files to your backup location, as defined in chapter 4.2.
During this copy process, a progress popup will be shown on your screen:
When the backup is finished, a backup summary report is shown on your screen:
Note: It is possible that the report is showing 'Failure' with an amount of files. These files are in most
cases files which are currently in use by other programs. To backup these files, make sure no
other applications are running which have access to the selected folders in chapter 4.2 before
you press the backup button again.
Click 'OK' to close the message.
Note: For more detailed information about the backup software, click the 'User Guide' button in the
main window of the software.
14
Enjoy the use of your CSATAi23U !