Herunterladen Diese Seite drucken

Conceptronic C150UAND Bedienungsanleitung

150n wireless usb-adapter
Vorschau ausblenden Andere Handbücher für C150UAND:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 25
In deze gebruiksaanwijzing vindt u stap-voor-stap instructies voor de installatie van de Conceptronic 150
Wireless USB Adapter op uw computer.
Als u meer informatie of ondersteuning voor uw product nodig heeft, kunt u het beste naar onze Service &
Support website op www.conceptronic.net gaan en een van de volgende mogelijkheden kiezen:
 FAQ
 Downloads
 Contact
Voor algemene informatie over Conceptronic producten gaat u naar de Conceptronic website op
www.conceptronic.net
De informatie in deze handleiding is gebaseerd op Windows 7 en Windows Vista en kan dus afwijken van
het gebruik op uw computer als deze een ander besturingssysteem heeft.
Voor sommige functie die in deze handleiding worden beschreven, moet u uw draadloze router of access
point handmatig bedienen of instellen. Zie de documentatie van uw draadloze router/access point voor
meer informatie over deze functies.
U vindt de volgende items in de verpakking van de Conceptronic 150
 Conceptronic 150
Wireless USB Adapter (C150UAND)
N
 5dBi antenne
 Product CD-ROM
 Deze meertalige gebruiksaanwijzing
 Garantiekaart en boekje CE-verklaring
Voordat u de stuurprogramma's en de software kunt installeren, moet u de 150
uw computer aansluiten.
Zet uw computer aan.
Doe de 150
Wireless USB Adapter in een USB-aansluiting van uw computer.
N
Uw computer herkent de nieuwe hardware en de „Wizard nieuwe hardware gevonden‟ wordt gestart.
Negeer deze wizard en klik op „Annuleren‟ om de wizard te sluiten.
U kunt nu verdergaan met het installeren van stuurprogramma's en software zoals beschreven in
hoofdstuk 3.
Conceptronic C150UAND
Gebruiksaanwijzing
Gefeliciteerd met uw nieuwe
Conceptronic 150
: Database met veel gestelde vragen
: Gebruiksaanwijzingen, stuurprogramma's, firmware en overige downloads
: Contact opnemen met Conceptronic Support
1. Inhoud verpakking
2. Hardware installeren
Wireless USB Adapter
N
Wireless USB Adapter:
N
NEDERLANDS
Wireless USB Adapter op
N
N
1

Werbung

loading

Inhaltszusammenfassung für Conceptronic C150UAND

  • Seite 1 Conceptronic 150 Wireless USB Adapter In deze gebruiksaanwijzing vindt u stap-voor-stap instructies voor de installatie van de Conceptronic 150 Wireless USB Adapter op uw computer. Als u meer informatie of ondersteuning voor uw product nodig heeft, kunt u het beste naar onze Service &...
  • Seite 2 De stuurprogramma's (en eventueel de software) worden nu op uw computer geïnstalleerd. Klik na afloop van de installatie op “Finish” (Voltooien) om de installatiewizard te sluiten. G. Het hulpprogramma Conceptronic Wireless Network Configuration Utility wordt geopend als u ervoor heeft gekozen om zowel de stuurprogramma's als de software te installeren.
  • Seite 3 Hulpprogramma Conceptronic Wireless Network Config Utility Na afloop van de installatie van de stuurprogramma's en de software wordt het hulpprogramma Conceptronic Wireless Network Config Utility geopend en ziet u de draadloze netwerken in uw omgeving op het scherm: Als het hulpprogramma niet wordt geopend, dubbelklikt u in het systeemvak op het pictogram van dit...
  • Seite 4 NEDERLANDS Automatisch verbinden met behulp van de (virtuele) WPS-knop. De Conceptronic 150 Wireless USB Adapter ondersteunt WPS (Wi-Fi Protected Setup, beveiligde instelling draadloos netwerk). WPS is een standaard waarmee u uw draadloze netwerk eenvoudig kunt beveiligen. Met WPS beveiligt u uw draadloze netwerk in slechts enkele eenvoudige stappen zonder dat hiervoor kennis van de verschillende encryptiemethodes vereist is.
  • Seite 5 NEDERLANDS Automatisch verbinden met de WPS pin-codefunctie. Als uw router of access point over WPS beschikt maar geen (virtuele) drukknop heeft, kunt u ook een WPS- verbinding maken met behulp van de pin-codefunctie. NB: Dit is alleen mogelijk als de WPS pin-codefunctie kan worden ingesteld in de web-interface van uw draadloze router of access point.
  • Seite 6 NEDERLANDS Handmatig verbinding maken met uw draadloze netwerk Het hulpprogramma toont alle draadloze netwerken die binnen bereik zijn van uw 150 Wireless USB Adapter. Als uw draadloze netwerk niet wordt getoond, kunt u op de knop „Rescan‟ (Opnieuw scannen) klikken om opnieuw naar netwerken te zoeken. - Selecteer in de lijst van draadloze netwerken het netwerk waarmee u verbinding wilt maken.
  • Seite 7 NEDERLANDS Netwerk met wachtwoordbeveiliging: Geef een naam in voor uw profiel, zorg ervoor dat de juiste SSID (identificatie van het draadloze netwerk) is geselecteerd en klik op de knop „Auth.\Encry.‟ (Autorisatie/versleuteling). Controleer of de automatisch vastgestelde beveiligingsmethode klopt met de instellingen van uw draadloze netwerk en geef de beveiligingssleutel of wachtwoordzin van uw draadloze netwerk in in het veld „WPA Preshared Key‟...
  • Seite 8 U vindt informatie over de wizards voor draadloze netwerkverbinding op de volgende internetpagina's:  http://support.microsoft.com/kb/928429  http://www.microsoft.com/windowsxp/using/networking/setup/wireless.mspx#4 NB: Zonder de Conceptronic stuurprogramma's en software kunt u geen gebruik maken van WPS. Als u de WPS-functionaliteit wilt gebruiken, moet u de stuurprogramma's en de software (opnieuw) installeren zoals beschreven in hoofdstuk 3.
  • Seite 9 Conceptronic 150 Wireless USB Adapter This user manual gives you a step-by-step explanation of how to install and use the Conceptronic 150 Wireless USB Adapter on your computer. If you need more information or support for your product, we advise you to visit our Service & Support website at www.conceptronic.net/support and select one of the following options:...
  • Seite 10 Accept the License Agreement by selecting “I Agree..” and click on “Next” to proceed. D. Select “Install driver and Conceptronic Wireless Network Configuration Utility” if you want to use the Conceptronic software, or select “Install drivers only” if you want to use the standard Windows Wireless Configuration utility. Click on “Next” to proceed.
  • Seite 11 Adapter and the Conceptronic Wireless Network Config Utility. The Conceptronic Wireless Network Config Utility When the installation of the drivers & software is completed, the Conceptronic Wireless Network Config Utility will be shown on your screen, displaying the wireless networks in your area:...
  • Seite 12 ENGLISH Connect automatically using the WPS (Virtual) Push Button The Conceptronic 150 Wireless USB Adapter supports WPS (Wi-Fi Protected Setup). WPS is a standard to easily secure your wireless network. With WPS you can protect your wireless network with just a few easy steps without knowledge of different encryption methods.
  • Seite 13 ENGLISH Connect automatically using the WPS PIN Code function When your router or access point is WPS capable, but does not have a (virtual) push button, you can create a WPS connection using the PIN Code function. Note: Your wireless router or access point needs to have the WPS PIN Code function in its web interface in order to use this function.
  • Seite 14 ENGLISH Connect manually to your wireless network The wireless utility will automatically show all available wireless networks within the range of your 150 Wireless USB Adapter. If your wireless network is not shown, click on the “Rescan” button to scan for available wireless networks.
  • Seite 15 ENGLISH Password protected network (secured): Enter a name for your profile, verify that the correct SSID (wireless network) is selected click on the “Auth.\Encry.” Button. Verify if the automatically selected security matches the settings of your wireless networks and enter the encryption key or passphrase of your wireless network into the “WPA Preshared Key”...
  • Seite 16 Driver only or Windows 7 native driver installation When you have chosen not to install the Conceptronic drivers & software for Windows 7, or you have only installed the Conceptronic drivers without the software, you need to use the standard Windows wireless...
  • Seite 17  Contacto : Contactar con el servicio técnico de Conceptronic Para información general sobre los productos de Conceptronic, visite la página web de Conceptronic www.conceptronic.net. La información de este manual está basada en Windows 7 y Vista, y las indicaciones podrían no coincidir exactamente con su caso si utiliza un sistema operativo diferente.
  • Seite 18 D. Seleccione “Instalar los drivers y la Utilidad de Configuración de Red Inalámbrica de Conceptronic” si desea utilizar el software de Conceptronic, o seleccione “Instalar sólo los drivers” si desea utilizar la utilidad de configuración inalámbrica estándar de Windows. Haga clic en “Siguiente” para continuar.
  • Seite 19 Utilidad de configuración de red inalámbrica de Conceptronic Una vez completada la instalación de los drivers y del software, aparecerá en pantalla la utilidad de configuración de red inalámbrica de Conceptronic, la cual mostrará las redes inalámbricas disponibles en su área.
  • Seite 20 Conexión automática mediante el botón (real o virtual) “Push Button” de WPS El adaptador USB inalámbrico 150N de Conceptronic es compatible con WPS (configuración protegida inalámbrica). WPS es un estándar para proteger fácilmente su red inalámbrica. Con WPS podrá proteger su red inalámbrica con sólo unos sencillos pasos sin necesidad de tener conocimientos sobre los diferentes...
  • Seite 21 ESPAÑOL Conexión automática utilizando la función WPS con código PIN Si su router o punto de acceso es compatible con WPS pero no tiene ningún botón de conexión real o virtual, también se puede crear una conexión WPS mediante un código PIN. Nota: Su router o punto de acceso inalámbrico debe disponer de la función de conexión con código PIN en su interfaz para poder utilizar esta función.
  • Seite 22 ESPAÑOL Conexión manual a su red inalámbrica La utilidad de configuración mostrará automáticamente todas las redes inalámbricas disponibles dentro del alcance de su adaptador USB inalámbrico 150 . Si su red inalámbrica no aparece, haga clic en el botón “Rescan” para volver a buscar redes inalámbricas disponibles. - Seleccione la red a la que desea conectarse en la lista de redes inalámbricas disponibles.
  • Seite 23 ESPAÑOL Red con protección por contraseña (protegida): Introduzca un nombre para su perfil, verifique que ha seleccionado la SSID correcta (red inalámbrica), y haga clic en el botón “Aut. / Cifrado”. Verifique que la protección seleccionada automáticamente encaja con la configuración de su red inalámbrica e introduzca la clave de cifrado o frase de seguridad de su red inalámbrica en el campo “Clave precompartida WPA”.
  • Seite 24 Instalación de sólo los drivers o mediante los drivers nativos de Windows 7 Si ha escogido no instalar los drivers y el software para Windows 7 de Conceptronic, o ha instalado sólo los drivers de Conceptronic sin el software, deberá utilizar la utilidad de conexión a red inalámbrica estándar de Windows para conectarse a su red inalámbrica:...
  • Seite 25 Wir gratulieren Ihnen zum Erwerb Ihres neuen Conceptronic 150 Wireless USB-Adapter Die Bedienungsanleitung erläutert alle Schritte zu Installation und Verwendung des Conceptronic 150N Wireless USB-Adapters auf Ihrem Rechner. Wenn Sie weitere Informationen oder Support für Ihr Produkt benötigen, besuchen Sie unsere Service &...
  • Seite 26 Akzeptieren Sie die Lizenzvereinbarung , indem Sie „I Agree… [Akzeptieren]“ auswählen und klicken Sie auf „Next [Weiter]“. D. Wählen Sie “Install driver and Conceptronic Wireless Network Configuration Utility [Treiber und Conceptronic Drahtlosnetzwerk-Hilfsprogramm installieren]” aus, wenn Sie die Conceptronic Software verwenden möchten, “Install drivers only [Nur Treiber installieren]”, wenn Sie das Standard- Windows-Hilfsprogramm für die Drahtloskonfiguration verwenden möchten.
  • Seite 27 Wireless Network Config Utility eine Verbindung zu einem Drahtlosnetz aufgebaut wird. Die Conceptronic Wireless Network Config Utility Nach Abschluss der Installation von Treiber und Software wird die Conceptronic Wireless Network Config Utility (das Verbindungsprogramm) auf dem Bildschirm geöffnet, in der die Drahtlosnetze in Ihrer...
  • Seite 28 DEUTSCH Automatischer Verbindungsaufbau mit der virtuellen WPS-Schaltfläche Der Conceptronic 150 Wireless USB-Adapter unterstützt WPS (Wi-Fi Protected Setup). WPS ist ein Standard zur einfachen Sicherung von Drahtlosnetzen. Mit WPS können Sie Ihr Drahtlosnetz mit wenigen, einfachen Schritten schützen, ohne dass Sie dazu Kenntnisse über Verschlüsselungmethoden zu besitzen brauchen.
  • Seite 29 DEUTSCH Automatisches Verbunden mit der Funktion WPS Pin Code Wenn der Router bzw. Access Point WPS unterstützt, aber keine virtuelle Schaltfläche hat, können Sie eine WPS-Verbindung mit der Pin-Code-Funktion anlegen. Hinweis: Der drahtlose Router bzw. Access Point Anforderungen muss die WPS-Pin-Code-Funktion im Web Interface unterstützen, damit die Funktion verwendet werden kann.
  • Seite 30 DEUTSCH Verbindung zum gewünschten Drahtlosnetz von Hand herstellen Das Verbindungsprogramm zeigt automatisch alle bestehenden Drahtlosnetze innerhalb des Einzugsbereichs des 150 Wireless USB-Adapters an. Wenn Ihr Drahtlosnetz nicht angezeigt wird, klicken Sie auf „Rescan [Neu scannen]”, um nach bestehenden Drahtlosnetzen zu suchen. - Wählen Sie das Netzwerk, mit dem eine Verbindung hergestellt werden soll, aus der Liste der verfügbaren Drahtlosnetze.
  • Seite 31 DEUTSCH Passwortgeschütztes Netz (gesichert): Geben Sie einen Namen für das Profil ein, prüfen Sie, ob das korrekte SSID (Drahtlosnetz) gewählt wurde und klicken Sie auf „Auth.\Encry. [Authentifizierung\Verschlüsselung]”. Überprüfen Sie, ob das automatische gewählte Sicherheitsniveau den Einstellungen Ihrer Drahtlosnetze entspricht und geben Sie den Verschlüsselungscode oder die Passphrase Ihres Drahtlosnetzes in das Feld „WPA Preshared Key”...
  • Seite 32 DEUTSCH Nur Treiber installieren oder native Treiber von Windows 7 installieren Wenn Sie sich entschieden haben, Conceptronic Treiber und Software für Windows 7 nicht zu installieren oder nur die Conceptronic-Treiber ohne Software installiert haben, müssen Sie das Standardprogramm von Windows zur Drahtlos-Verbindung verwenden: Die Verbindungsdaten für die Assistenten für diese Drahtlosnetz-Verbindung finden Sie auf den folgenden...
  • Seite 33 1. Contenu du Coffret Les éléments suivants sont fournis dans le coffret avec l'Adaptateur 150N Sans fil USB de Conceptronic :  Adaptateur 150 Sans fil USB de Conceptronic (C150UAND) ...
  • Seite 34 Les drivers et le software s'installent sur votre ordinateur (si vous avez sélectionné cette option). Lorsque l'installation est terminée, cliquez sur "Finish" pour refermer l'assistant d'installation L'Utilité de Configuration de Réseau Sans Fil de Conceptronic s'affiche si vous avez choisi d'installer les drivers et le software.
  • Seite 35 Lorsque les drivers et le software sont installés, l'Utilité de configuration de Réseau Sans fil de Conceptronic s'affiche à votre écran et présente les réseaux sans fil disponibles dans votre zone : Si le dispositif sans fil n'est pas affiché, cliquez deux fois sur l'icône de votre plateau système du dispositif sans fil : Vous pouvez connecter votre réseau sans fil de deux manières différentes : automatiquement en utilisant...
  • Seite 36 Connectez-vous automatiquement à l'aide du Bouton WPS (Réel ou Virtuel). L'Adaptateur 150N Sans fil USB de Conceptronic supporte WPS (Configuration Sécurisée de Wi-Fi). WPS est une norme qui permet de sécuriser facilement votre réseau sans fils. Avec WPS, vous pouvez protéger votre réseau sans fils en quelques petites clics sans obligatoirement connaître les différentes options de...
  • Seite 37 FRANÇAIS Connectez-vous automatiquement à l'aide de la fonction Code PIN de WPS Lorsque votre routeur ou votre point d'accès supporte WPS, mais si vous ne disposez pas de Bouton réel ou virtuel, vous pouvez créer une connexion WPS à l'aide de la fonction de Code PIN. Remarque: Votre routeur sans fil ou votre point d'accès doit disposer de la fonction de Code PIN WPS sur son interface web pour pouvoir utiliser cette fonction.
  • Seite 38 FRANÇAIS Connexion manuelle à votre réseau sans fil Le dispositif sans fil affichera automatiquement tous les réseaux sans fil disponibles dans la portée de votre Adaptateur 150N USB. Si votre réseau sans fil ne s'affiche pas, vous pouvez cliquer sur "Rescan" [Scanner à...
  • Seite 39 FRANÇAIS Réseau protégé avec un mot de passe (sécurisé) : Indiquez le nom de votre profil, vérifiez que le SSID correct (réseau sans fil) est bien sélectionné et cliquez sur le bouton "Auth.\Encry". Vérifiez si la sécurité sélectionnée automatiquement correspond bien aux paramètres de vos réseaux sans fil et indiquez le code de cryptage ou votre mot de passe pour votre réseau sans fil dans le champ "WPA Preshared Key"...
  • Seite 40 Installation uniquement du Driver ou moyennant le driver natif de Windows 7. Si vous avez choisi de ne pas installer les drivers et software de Conceptronic pour Windows 7, ou si vous avez installé les drivers de Conceptronic sans le software, vous devez utiliser l'assistant de connexion standard de Windows pour les réseaux sans fil pour vous connecter à...
  • Seite 41  Contact : Contatta il servizio di assistenza Conceptronic Per ricevere informazioni generali sui prodotti Conceptronic, visitare il sito Web di Conceptronic all‟indirizzo www.conceptronic.net Le informazioni contenute in questo manuale si riferiscono a Windows 7 e Vista, e possono variare in maniera significativa in computer in cui sia installato un sistema operativo differente.
  • Seite 42 I driver e il software (se selezionato) saranno installati sul computer. Quando l‟installazione è completata, fare clic su “Fine” (“Finish”) per chiudere la procedura guidata d‟installazione. L‟utilità di configurazione della rete wireless di Conceptronic sarà visualizzata se si è scelto di installare i driver e il software. Nota: Si consiglia di riavviare il computer una volta completata la nuova installazione hardware.
  • Seite 43 Quando l‟installazione dei driver e del software è completa, l‟utilità di configurazione della rete wireless Conceptronic verrà visualizzata a schermo, mostrando le reti senza fili presenti nell‟area : Se l‟utilità wireless non viene visualizzata, fare doppio click sull'icona dell'utilità wireless presente sulla barra delle applicazioni: Esistono due modalità...
  • Seite 44 Connessione automatica mediante pulsante WPS reale o virtuale L'adattatore USB Wireless 150 Conceptronic supporta il sistema WPS (installazione protetta Wi-Fi). Il sistema WPS è uno standard per installare in maniera facile e sicura le reti senza fili. Con il sistema WPS è...
  • Seite 45 ITALIANO Connessione automatica utilizzando la funzione WPS con codice PIN Se il router o il punto di accesso a disposizione supporta la funzione WPS ma non ha un Push Button reale o virtuale, è possibile utilizzare la funzione con codice PIN per stabilire una connessione WPS. Nota: Per poter utilizzare questa funzione, è...
  • Seite 46 ITALIANO Connessione manuale alla rete senza fili L‟utilità wireless visualizzerà in maniera automatica tutte le reti senza fili disponibili entro la gamma dell‟adattatore USB Wireless 150 . Se non è presente la propria rete senza fili, fare click sul pulsante “Ricerca”...
  • Seite 47 ITALIANO Rete protetta da password (modalità sicura): Inserire un nome per il profilo, verificare che sia stato selezionato il corretto SSID (rete senza fili) e fare click sul pulsante “Auth.\Encry.”. Accertarsi che le impostazioni di sicurezza selezionate automaticamente siano conformi alle impostazioni delle reti senza fili a cui ci si vuole collegare e inserire la chiave o la password di criptaggio della rete senza fili nel campo “WPA Preshared Key”.
  • Seite 48 Installazione del solo driver o del driver nativo di Windows 7 Allorché si è deciso di non installare i driver e il software Conceptronic per Windows 7, o si è scelto di installare unicamente i driver Conceptronic senza il software, è necessario utilizzare la procedura guidata di connessione alla rete senza fili di Windows per collegarsi a una rete wireless: È...
  • Seite 49  Contact : Contacte o suporte da Conceptronic Para informações gerais sobre os produtos da Conceptronic, visite a página web da Conceptronic em www.conceptronic.net. A informação contida neste manual baseia-se no Windows 7 e no Windows Vista, e pode ser diferente do seu computador no caso de estar a usar um sistema operativo diferente.
  • Seite 50 D. Seleccione “Install driver and Conceptronic Wireless Network Configuration Utility” (Instalar o controlador e a Aplicação de Configuração de Rede Sem Fios da Conceptronic) caso queira usar o software da Conceptronic, ou seleccione “Install drivers only” (Instalar apenas os controladores) caso queira usar a aplicação standard de Configuração Sem Fios do Windows.
  • Seite 51 Quando a instalação dos controladores e do software estiver concluída, a Aplicação de Configuração de Rede Sem Fios da Conceptronic vai aparecer no seu ecrã, mostrando as redes sem fios da sua área: Se a aplicação sem fios não aparecer, faça um duplo clique em cima do ícone da aplicação sem fios na bandeja de sistema: Pode ligar à...
  • Seite 52 Ligar automaticamente usando o Botão WPS (Real ou Virtual) O Adaptador USB Sem Fios 150 da Conceptronic suporta a especificação WPS (Wi-Fi Protected Setup). O WPS é uma norma para proteger facilmente a sua rede sem fios. Com o WPS pode proteger a sua rede sem fios seguindo apenas alguns passos fáceis sem ter conhecimentos de vários métodos de encriptação.
  • Seite 53 PORTUGUÊS Ligar automaticamente através da função WPS por Código PIN Quando o seu router ou ponto de acesso suportar WPS, mas não tiver um botão real ou virtual, pode criar uma ligação WPS através da função por Código PIN. Nota: O seu router sem fios ou ponto de acesso precisa de ter a função WPS por Código PIN na interface web para que se possa usá-la.
  • Seite 54 PORTUGUÊS Ligar manualmente à sua rede sem fios A aplicação sem fios mostra automaticamente todas as redes sem fios disponíveis dentro do alcance do seu Adaptador USB Sem Fios 150 . Se a sua rede sem fios não aparecer, prima o botão “Rescan” (Procurar) para procurar as redes sem fios disponíveis.
  • Seite 55 PORTUGUÊS Rede protegida por palavra-passe (protegida): Introduza um nome para o seu perfil, verifique se está seleccionada a SSID (rede sem fios) correcta e clique no botão “Auth.\Encry.” (Autenticação / Encriptação). Verifique se a segurança seleccionada automaticamente corresponde às configurações das suas redes sem fios e introduza a chave de encriptação ou frase-chave da sua rede sem fios no campo “WPA Preshared Key”.
  • Seite 56 Instalação apenas dos controladores ou dos controladores nativos do Windows 7 Caso tenha escolhido não instalar os controladores e o software da Conceptronic para o Windows 7, ou caso só tenha instalado os controladores da Conceptronic sem o software, tem de usar o assistente de ligação de rede sem fios padrão do Windows para estabelecer a ligação a uma rede sem fios:...