Husqvarna 105 Kurzanleitung Seite 6

1. PL ACEMENT OF AND CONNECTING THE CHARGING STATION
See chapters 3.2 and 3.3 in the Operator's Manual
1. Place the charging station at a central position in the working area, with a lot of open space in front of the charging station
and on a relatively horizontal surface.
2. Connectthepowersupply'slowvoltagecabletothechargingstationandthetransformer.
3. Connectthepowersupplytoa100-240 V wall socket.
4. Place the robotic lawnmower in the charging station to charge the battery while the boundary wire is laid. Set the main
switch to position 1.
2 . PL ACEMENT OF THE BOUNDARY WIRE AND THE GUIDE WIRE
See chapter 3.4 in the Operator's Manual
1. Lay the boundary wire so that it forms a loop around the working area.
2. Make an eyelet at the point where the guide wire will later be connected.
3. Runtheguidewiretothepointontheboundarylooptheconnectionwillbemade.Avoidlayingthewireattightangles.
3. CONNECTING THE BOUNDARY WIRE AND THE GUIDE WIRE
See chapter 3.5 in the Operator's Manual
1. Runtheguidewirethroughtheslotatthebottomofthechargingstation.
2. Open the connectors and lay the wire ends in the recesses on each connector.
3. Press the connectors together using a pair of pliers.
4. Cutoffanysurplusboundarywire.Cut1to2cmabovetheconnectors.
5.  P resstheconnectorsontothecontactpins,markedAL(left)andAR(right),onthechargingstation.Itisimportantthatthe
right-handwireisconnectedtotheright-handcontactpin,andtheleft-handwiretotheleft-handpin.
6. Fasten the connector to the contact pin marked Guide on the charging station.
4 . CONNECTING THE GUIDE WIRE TO THE BOUNDARY WIRE
See chapter 3.6 in the Operator's Manual
1. Cuttheboundarywirewithawirecuttersatthecentreoftheeyeletthatwasmadeinstep2.2.
2.  C onnecttheguidewiretotheboundarywireusingtheaccompanyingcouplers.Pressthecouplerscompletelytogether
with a polygrip.
5. STARTING AND STOPPING
See chapters 4.3 and 4.4 in the Operator's Manual
STARTING
1. Open the cover by pressing the STOP button.
2. Set the main switch to position 1.Whenyoudothisforthefirsttime,astartupsequencestartswhereyouselectafour
digitPINcodeamongotherthings.
3. Press the START button and close the cover.
STOPPING
Press the STOP button.
6. ADJUSTING THE ROBOTIC L AWNMOWER TO SUIT THE SIZE OF YOUR L AWN
See chapter 6.3 in the Operator's Manual
Themowingresultsdependonmowingtime.AdjustthemowingtimetosuityourgardenusingtheTimer function. You decide
whattimesduringthedaytheroboticlawnmoweristowork.Theroboticlawnmowermowsabout43m²perhourandday.For
example;ifyourgardenconsistsof300m²ofgrass,theroboticlawnmowershouldworkonaverage7hoursperday.
7. MAINTENANCE
See chapter 8 in the Operator's Manual
1.  T hemainswitchshouldbeinthe0positionduringallworkontheroboticlawnmower'schassis,suchascleaningor
replacingtheblades.Replacethebladesregularlyforthebestmowingresult.
2. Neveruseahigh-pressurewasherorevenrunningwatertocleantheroboticlawnmower.Neverusesolventsforcleaning.
3.  A llconnectionstothechargingstation(powersupply,boundaryandguidewire)mustbedisconnectedifthereisariskofa
thunderstorm.
4. Fully charge the battery at the end of the season before winter storage.
QG,1157869-,105,2016_151127.indd 6
EN
2015-11-27 10:20:14