Balluff BML BM2-N-Serie Betriebsanleitung Seite 39

BML BM2-N...
Absolute linear magnetic encoder system
1
About this guide
1.1 Validity
This guide provides all necessary information for the safe
use of the sensor module BML BM2-N... with analog or
digital as well as BiSS/SSi or SPI interface. It applies to the
following models (see Type code on page 31):
– BML BM2-N...
Read this guide and the other applicable documents
completely before installing and operating the product.
Original user's guide
This guide was created in German. Other language
versions are translations of this guide.
© Copyright 2023, Balluff GmbH
All contents are protected by copyright. All rights reserved,
including the rights of reproduction, distribution,
processing and translation.
1.2 Other applicable documents
Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
– Interfaces for BML magnetic encoder
1.3 Symbols and conventions
Individual instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
www.balluff.com
1.4 Explanation of the warnings
Always observe the warnings in this guide and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could lead to damage to or
destruction of the product.
DANGER
The general warning symbol in conjunction with the signal
word DANGER identifies a hazard which, if not avoided,
will certainly result in death or serious injuries.
1.5 Technical terms and abbreviations used
FFC Flexible flat cable
ZIF Zero Insertion Force
english 5