Werbung
Konformitätserklärung
Manufacturer's Name:
Manufacturer's Address:
Declares under sole responsibility that the product as originally delivered
Product Name:
Product Number:
Product Modules:
complies with the essential requirements of the following applicable European Directives, and
carries the CE marking accordingly:
The Low Voltage Directive 73/23/EEC, amended by 93/68/EEC
The EMC Directive 89/336/EEC, amended by 93/68/EEC
and conforms with the following product standards:
Standard
IEC 61326:2002 / EN 61326:1997+A1:1998+A2:2001+A3 :2003
EMC
Canada: ICES/NMB-001:1998
Australia/New Zealand: AS/NZS CISPR 11:2002
IEC 61010-1:2001 / EN 61010-1:2001
Safety
Supplementary Information:
1
) The product number is followed by a 3 digit number to define smart probe modules
2
) FDA accession no. 0620567
This DoC applies to above-listed products placed on the EU market after:
2006-September-25
Date
For further information, please contact your local Agilent Technologies sales office, agent or distributor.
Template:A5971-5302-1, Rev. B.00
Bedienungshandbuch Agilent WireScope Pro
DECLARATION OF CONFORMITY
According to ISO/IEC Guide 22 and CEN/CENELEC EN 45014
Agilent Technologies International sarl
Rue de la Gare 29
CH - 1110 Morges
Switzerland
Wirescope Pro - Network Performance Analyzer
N2645A
N2646A
1
N2644A-...
) - Smart Probes
2
N2647SM
)
2
N2647MM
)
CISPR 11:1997+A1:1999 / EN 55011:1998+A1:1999
IEC 61000-4-2:1995+A1:1998+A2 :2000 /
EN 61000-4-2:1995+A1:1998+A2:2001
IEC 61000-4-3:2002+A1:2002 / EN 61000-4-3:2002+A1:2002
IEC 61000-4-4:1995+A1 :2000+A2 :2001 /
EN 61000-4-4:1995+A1:2001+A2:2001
IEC 61000-4-5:1995+A1:2000 / EN 61000-4-5:1995+A1:2001
IEC 61000-4-6:1995+A1:2000 / EN 61000-4-6:1996+A1:2001
IEC 61000-4-8:1993+A1:2000 / EN 61000-4-8:1993+A1:2001
IEC 61000-4-11:1994+A1:2000 / EN 61000-4-11:1994+A1:2001
Canada: CAN/CSA-C22.2 No. 61010-1:2004
USA: UL 61010-1:2004
- Main unit
- Dual Remote unit
- SM Fiber Probe
- MM Fiber Probe
Hans-Martin Fischer
Name
PNT Quality Manager
Agilent Technologies
Title
2006-September-25
Konformitätserklärung
Limit
Group 1 Class A
4 kV CD, 8 kV AD
3 V/m, 80-1000 MHz
0.5 kV signal lines, 1 kV power lines
0.5 kV line-line, 1 kV line-ground
3 V, 0.15-80 MHz
30A/m
1 cycle/100%
Revision: A
1
3
Werbung
