Oase Bitron Eco 120 W Bedienungsanleitung Seite 25

Order of starting up steps
• Switch on the pump.
• Check all connections for leaks.
• Connect the unit to the power supply.
– The unit switches on with the last selected operating mode.
– Switch on the unit if necessary. (→ Switching ON/OFF)
• Select the operating mode.
– A garden pond is subject to a number of different influencing factors that encourage algae
growth (e.g. direct sunlight, nutrient contamination, natural planting). Therefore the suita-
ble Eco mode can only be individually determined.
– Observe the information regarding the selection of a suitable operating mode. (→ Selecting
the operating mode)
Switching ON/OFF
Function
Switching on
Switching off
Proceed as follows
Press .
Press several times until
the UVC lamps turn off after
operating mode "100 %".
Note
• The operating mode "50 %" is active.
• The display indicates the current water temper-
ature.
• The status display of the UVC lamps is lit.
• Switching sequence: 50 % – 75 % – 90 % – 100 %
– Off.
• The display indicates OF.
• In the event of an error, the corresponding error
message is displayed.
EN
25