Oase Bitron Eco 120 W Bedienungsanleitung Seite 21

Installation and connection
Operation with pool water or salt water
• For operation with pool water or salt water, adhere to the following limits:
Type
pH value
Free chlorine
Bound chlorine
Chloride content
Salt content
Water temperature
• Pool water or salt water can impair the appearance of the unit. Such impairments are excluded
from the guarantee.
Distances to be adhered to
 A
• Minimum safety distance between the unit and the water: 2 m.
• Allow sufficient space for carrying out maintenance work.
– Ensure that there is space of at least double the width of the casing for removing the unit
head.
Solo operation
 B
• Only install the unit in the permitted positions. This ensures fault-free operation.
• Take the required distances into consideration. (→ Distances to be adhered to)
• Use suitable fastening material for the type of ground. Ensure that the fastening means se-
curely hold the unit. Take the weight of the unit into consideration.
• Fit a slide valve in the water supply upstream of the inlet of the unit if the unit is to be in-
stalled below the water level. This allows the water supply to be shut off for maintenance
work.
Pool water
7.2 ... 7.6
0.3 ... 0.6 mg/l
< 0.2 mg/l
< 200 mg/l
–
+4 ... +30°C
Salt water
7.5 ... 8.5
< 0.3 mg/l
–
–
< 3.5 %
+4 ... +25°C
EN
21