LG TONE Ultra SE Bedienungsanleitung Seite 7

Pairing and Connecting
Put in your earbuds to easily pair and connect by following the voice prompts.
NOTE: If you are prompted for the authorization code (PIN code), type 0000.
If you hear that the battery is insufficient, recharge the battery before
proceeding with pairing.
If pairing is not completed within three minutes, the power automatically turns
off. If this happens, slide the Power switch from the OFF to the ON position
to turn the power on.
Connecting Quickly
1
4
LG HBSXXX
1 From the mobile phone's Settings menu, turn on Bluetooth.
2 On the headset, slide the Power switch towards the ON position to turn on the power.
3 The blue Indicator lamp turns on, and the headset enters Search mode.
4 From the mobile phone or device, select [LG HBSXXX] to connect.
NOTE: In the above, HBSXXX is a model number unique to the product and may differ
depending on the model (For example, in the case of a HBS-835S model, LG HBS835S
is displayed).
5 A voice message will indicate that the connection is completed.
2
ON OFF
OFF
5
3
ON OFF
OFF