LG TONE Ultra SE Bedienungsanleitung Seite 12

Battery Charging and Alerts
Open the Charging port cover and connect the charger to the Charging port.
Slide and hold the Volume jog switch in the volume down ( ) direction for one second to check the
Indicator lamp and battery level by voice.
Vibration Alert Settings
Out of Range
If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically
reconnects to the device. If the device is not automatically reconnected, press the MFB on the
product to connect to it manually.
Indicator Lamp
Battery Status
Battery Status
Indicator Lamp
Slide and hold the Volume jog switch in the volume up
for two seconds when the headset is not in use.
If you turn off the vibration alerts, it will not vibrate even when a call
is being received or you are out of communication range.
NOTE: When vibration is turned off, the headset will not vibrate
when receiving an incoming call.
Red
Charging
Sufficient
Blue flashes Purple flashes
10
Purple Blue
80% Completed
Normal Insufficient
Red flashes
direction
( )