Oase ProMax ClearDrain 7000 Gebrauchsanleitung Seite 17

Automatic mode ProMax ClearDrain 7000
When the water level rises, it lifts the float switch until the switch-on point is reached and the
pump switches on.
When the water level drops, the float switch lowers until the switch-off point is reached and the
pump switches off.
 Push the float switch cable into the cable clip.
– The shorter the cable between the float switch and the cable clip, the lower the switch-on
point and the higher the switch-off point.

To ensure fault-free function, ensure that the cable length between the float switch and the
cable bracket is at least 100 mm.

The minimum residual water height is only reached in manual mode.
EN
POX0004
17