General Operation Of The Hob; Residual Heat Indicator; How To Activate The Flexible Cooking Zones ( Bic4 2Kb Gkru Ix 4 Only) - Pkm BIC4 GKRU IX 4 Bedienungsanleitung

Localisation of the
Symbol for the

OVAL
 see also fig. in chapter 3.1 O
Symbol for the

DUAL
 see also fig. in chapter 3.1 O
After cooking turn the rotary knob on position «
off the corresponding cooking zone.
NOTICE! Turn the rotary knobs of the flexible cooking zones to the desired
power level in clockwise direction only. Then you can turn the knob back
to its home position. Otherwise you may damage the temperature control
knob.

4.3.2 General operation of the hob

1. Put a cookware directly onto a cooking zone. Always keep the bottom of the
cookware as well as the cooking zone clean and dry.
2. Turn the corresponding rotary knob clockwise or anticlockwise to switch on the
hob (turn the rotary knobs of the flexible cooking zones clockwise only!)
3. Turn the corresponding knob to position «
Beware of the hot surfaces of the cooking zones! The
(s. fig. in chapter 3.1 O
still hot. The residual heat indicator disappears as soon as the relevant cooking
zone has cooled down. You can use the residual heat for saving energy when
starting a new cooking procedure on a cooking zone which is still warm / hot.
4.3.3 How to activate the flexible cooking zones (
1. Turn the corresponding rotary knob i n clockwise direction to the symbol
(dual cooking zone) or
cooking zone; s fig. in chapter 3.1 O
2. Turn the rotary knob to the desired power setting (1 / 2 / 3 / 4 / 5 / or 6)
afterwards.
COOKING ZONE
ACTIVATION OF THE FLEXIBLE COOKING ZONE
cooking zone.
ACTIVATION OF THE FLEXIBLE COOKING ZONE
cooking zone
VEN AND HOB
(oval cooking zone) to activate the oval or dual
VEN AND HOB
VEN AND HOB
VEN AND HOB
0 »
0 »
to stop cooking.

RESIDUAL HEAT INDICATOR

et seq.) indicates which cooking zones are
BIC4 2KB GKRU IX 4
et seq.).
78
et seq.
et seq.
immediately to switch
only)
:
: