Werbung
Industrieprotokolle
17.3 Funktion EtherNet/IP
Tab. 56:
Id
Attribute
0x1
Status
0x2
Interface Capability
flags
0x3
Config Control
0x4
Physical Link Object Get
0x5
Interface Configura-
tion
0x6
Hostname
0x7
Safety Network
Number
0x8
TTL Value
350
Attribute der Instanz 1
Access
Rule
Get
Get
Set/Get DWORD
Set/Get STRUCT of:
Set/Get STRING
Get/Set USINT
Data type
DWORD
DWORD
STRUCT of:
UINT PathSize
EPATH Path
UDINT IpAddress
UDINT Netmask
UDINT GatewayAd-
dress
UDINT NameServer1
UDINT NameServer2
STRING DomainName
Description
0: Interface Status
(0=Interface not configured,
1=Interface contains valid
config)
6: ACD status (default 0)
7: ACD fault (default 0)
0: BOOTP Client
1: DNS Client
2: DHCP Client
3: DHCP-DNS Update
4: Configuration setable (within
CIP)
Other bits reserved (0)
7: ACD capable (0=not capable,
1=capable)
0: 0x0=using stored config
0x1=using BOOTP
1:
0x2=using DHCP
2:
3:
4: One device uses DNS for
name lookup (constantly 0
because it is unsupported)
Other bits reserved (0)
Path to the Physical Link Object,
constantly {0x20, 0xF6, 0x24,
0x01} describing instance 1 of the
Ethernet Link Object.
IP Stack Configuration (IP-
Address, Netmask, Gateway, 2
Name servers (DNS, if supported)
and the domain name).
Hostname (for DHCP DNS
Update)
Unsupported
Time to live value for IP multicast
packets Range 1..255 (default 1)
UM Config OCTOPUS-8TX HiOS-2A
Release 9.4 07/2023
Werbung
