Contents; Important Notes - elco EK02B.12 L-Z Betriebsanleitung

Overview

Contents

Overview
Function
Installation
Startup
Servicing

Important notes

The light-fuel-oil burners EK02B.12 L-Z
and EK02B.19 L-Z are designed to run
on extra-light fuel-oil.
The design and function of these
burners both conform to EN 267
standards.
All installation, initial-startup and
maintenance work must be carried out
by authorised service engineers, who
should observe all relevant guidelines,
directives and specifications. For any
other use, the agreement of ELCO
Klöckner must be asked for.
Description of burner
The light-fuel-oil burner EK02B.12/19
L-Z is a 2-stage, full-automatic burner in
monobloc configuration. It is suitable,
when used within its operating range,
for fitting to heating boilers conforming
to EN 303 standards, and also for the
equipping of warm-air heaters
conforming to DIN 4794 or DIN 30697.
For any other use, the agreement of
ELCO Klöckner must be asked for.
Scope of delivery
The burner is supplied with the following
items:
2 fuel-oil hoses
1 connection flange with insulating
gasket
1 bag containing installation fittings
1 transparent envelope containing
technical documentation
14
Contents. . . . . . . . . . . . . . . . . . . . . . 14
Important notes . . . . . . . . . . . . . . . . . . 14
Technical data, Power graphs . . . . . . . . . . 15
Burner description, Dimensions . . . . . . . . . . 16
Operating function, Safety function . . . . . . . . 17
Automatic control unit . . . . . . . . . . . . . . . 18
Burner assembly . . . . . . . . . . . . . . . . . 19
Fuel-oil supply . . . . . . . . . . . . . . . . . . . 20
Electrical supply . . . . . . . . . . . . . . . . . 20
Pre-startup check, Adjustment settings . . . . . . 21
Check of the burner head . . . . . . . . . . . . . 21
Airflow regulation . . . . . . . . . . . . . . . . . 22
Fuel-oil-pressure regulation . . . . . . . . . . . . 23
Maintenance . . . . . . . . . . . . . . . . . . . 24
Troubleshooting . . . . . . . . . . . . . . . . . . 25
The following standards should be
observed in order to ensure safe,
environmentally sound and
energy-saving operation:
DIN 4755
Fuel-oil-fired devices installed in
heating systems
EN 226
Connection to heating systems of
vaporizing-fuel-oil and forced-draught
gas burners
EN 60335-2
Safety of electrical devices designed
for domestic use
Place of installation
The burner must not be operated in the
presence of corrosive fumes (e.g.
hairspray, tetrachloroethylene or
carbon tetrachloride), large amounts of
dust, or high levels of air humidity (e.g.
in laundry rooms). Ensure that a
ventilation inlet of the following
characteristics is provided:
up to 50kW: 150cm
-
for each additional kW: + 2.0cm
-
Rules may vary according to local
legislation.
05/2005 - Art. Nr. 13 013 643B
Seite Declaration of conformity for
forced-draught fuel-oil burners
We, CEB, of
F-74106 ANNEMASSE Cedex
declare under our sole responsibility
that the products
EK02B.12 L-Z
EK02B.19 L-Z
conform to the following standards
EN 50165
EN 55014
EN 60335
EN 60555-2
EN 60555-3
EN 267
In accordance with the stipulations of
European Directives
89 / 392 /EEC
89 / 336 /EEC
73 / 23 /EEC
92 / 42 /EEC
97 / 23 /EEC
These products bear the CE marking
Annemasse, January 2004
J.HAEP
We can accept no warranty liability
whatsoever for loss, damage or
injury caused by any of the
following:
unauthorised use - incorrect
-
installation and/or
initial startup on the part of the buyer
-
or any third party, including the fitting
of non-original parts.
Handover and operating instructions
The person engaged to install the firing
system must provide the user with
operation and maintenance instructions
no later than at the moment in which
the unit is handed over for use. These
instructions should be displayed in a
prominent location at the point of
installation of the heating unit, and
should include the address and
telephone number of the nearest
2
customer service centre.
2
Advice to the user
Have the system professionally
serviced at least once a year. Its is
recommended to enter into a
maintenance contract in order to
ensure trouble-free running.
Industrial machines
EMC-directive
Low-voltage devices
directive
Working efficiency
Pressure equipment
directive