Shure UHF-R Bedienungsanleitung Seite 7

Inputs and Outputs
UR1 Transmitter Audio Input
Connector: 4-Pin male mini connector (TA4M)
Input Configuration: Unbalanced, active
Maximum Input Level: +10 dBu (sensitivity 0 dB)
(1 kHz, 1% THD) +20 dBu (sensitivity –10 dB)
TA4M Connector Pin Pin 1: Ground
Assignments: Pin 2: +5 Vdc bias
Pin 3: Audio, 200 kW
Pin 4: Tied through active load (on main board)
to Ground.
(On instrument adapter cable, Pin 4 floats)
UR2 Transmitter Audio Input
Input Configuration:
Actual Impedance:
Maximum Input Level:
1 kHz, 1% THD
UR1, UR1M Transmitter RF Output
Connector:
Actual Impedance:
Pin Assignments:
Architects' and Engineers' Specifications
The wireless system shall operate in the UHF band between 470-865 MHz and 944-952 MHz, with the specific range being dependent on the user's locale. The system
shall include the option of changing the operating frequency in order to avoid RF interference, enabling up to 160 systems to operate simultaneously in the same location.
Preconfigured group, channel and frequency setups shall be available to ensure that multiple systems in use do not interfere with one another.
All transmitters shall be powered by 2 AA batteries and shall have a power on/off switch. The bodypack will have an LED indicating that power is on. Available transmitters
shall include: a body pack for use with electric guitars, basses, and other electric instruments, and a handheld microphone for vocals. The transmitters shall have a DC/DC
converter to ensure consistent performance, even if battery voltages change.
The receiver shall have a user-programmable, menu-driven LCD showing group, channel, frequency, name, squelch level, and locked/unlocked status. The system shall use
technology such as MARCAD‚ signal combining circuitry to improve reception, minimize signal dropouts, and achieve the best possible signal-to-noise ratio. An equalizer,
tone key squelch, and noise squelch circuitry shall be built into the system to provide optimal sound quality and minimize unwanted noise. The receiver shall include dual RF
meters (one for each antenna), an audio level meter, and a Networking Interface connector for computer control and monitoring. The receiver shall have a volume control and
an adjustable noise squelch control.
The system shall be the Shure UHF-R Wireless.
Unbalanced, active
>1 MW
+4.8 dBu
SMA
50 W
Shell = Ground
Center = Signal
English
Replacement Parts and Accessories
Furnished Accessories
Microphone Stand Adapter (UR2)
Threaded locking Adapter (with TA4F), UR1
Zipper Bag (UR1)
Zipper Bag (UR2)
Antenna (UR1, UR1M) 470-530 MHz
Antenna (UR1, UR1M) 518-578 MHz
Antenna (UR1, UR1M) 578-698 MHz
Antenna (UR1, UR1M) 740-865 MHz
Antenna (UR1, UR1M) 944-952 MHz
Transmitter Carrying Case
Optional Accessories
SM58 Head with Grille
SM86 Head with Grille
BETA 58 Head with Grille
BETA 87A Head with Grille
BETA 87C Head with Grille
SM87A Head with Grille
KSM9/SL Head with Grille
KSM9HS Head with Grille (Champagne, Condenser)
KSM9/BK Head with Grille
KSM9HS Head with Grille (Black, Condenser)
Matte Silver Grille (SM58)
Matte Silver Grille (SM86)
Matte Silver Grille (BETA 58)
Black Grille (SM87)
Matte Silver Grille (BETA 87A)
Matte Silver Grille (BETA 87C)
Black Grille (BETA 58)
Black Grille (BETA 87A/BETA 87C)
Champagne Grille (KSM9/SL)
Black Grille (KSM9/BK)
Popper Stopper' Windscreen
Belt Clip (UR1)
Bodypack Pouch (Black), UR1
Bodypack Pouch (White), UR1
Bodypack Pouch (Black), UR1M
Bodypack Pouch (White), UR1M
3-Pin mini Lemo conversion kit, UR1M
Mute Switch for Bodypack
Mute Switch for 2 Bodypacks
7
WA371
WA340
26A13
26A14
UA700
UA710
UA720
UA730
UA740
95C9053
RPW112
RPW114
RPW118
RPW120
RPW122
RPW116
RPW180
RPW182
RPW184
RPW186
RK143G
RPM266
RK265G
RK214G
RK312
RK312
RK323G
RK324G
RPM260
RPM264
A85WS
44A8031
WA580B
WA580W
WA581B
WA581W
WA335
WA661
WA662