Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance and cleaning
4 seconds, until the status LED lights up green
(see figure 11).
•
Release the system button to finish the procedure.
The device will perform a restart. After the restart, you can
again integrate your device into your Homematic IP system.
10
Maintenance and cleaning
The product does not require any maintenance.
Enlist the help of an expert to carry out any main-
tenance or repairs.
Clean the device using a soft, lint-free cloth that
is clean and dry. You may dampen the cloth a lit-
tle with lukewarm water in order to remove more
stubborn marks. Make sure that no moisture will
ingress into the housing. Do not use any deter-
gents containing solvents, as they could corrode
the plastic housing and label.
The mains voltage must be disconnected before
the device is removed (trip the miniature circuit-
breaker). Only qualified electricians (to VDE 0100)
are permitted to carry out work on the 230 V
mains.
52
Werbung
