HomeMatic IP HmIP-BBL-2 Installations- Und Bedienungsanleitung Seite 46

Start-up
Step 11
Step 12
Step 13
6.3 Add device
Please read this entire section before starting
the pairing procedure.
First set up your Homematic IP Access Point via
the Homematic IP app to enable operation of
other Homematic IP devices within your system.
For further information, please refer to the oper-
ating manual of the Access Point.
You can connect the device to the Access Point
or to the Central Control Unit CCU3. For detailed
information, please refer to the Homematic IP
User Guide, available for download in the down-
load area of www.homematic-ip.com.
To integrate the blind actuator into your system and
enable it to communicate with other Homematic IP
devices, you must add the device to your Homematic IP
46
Insert the rocker in the frame (see Fig. 8).
Switch the fuse of the power circuit back
on again.
Now the blind actuator can be added to
the Homematic IP Access Point (see „6.3
Add device" on page 46).