Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When there is no longer any water in the device, the indicator lamp turns red.
• Now press the ON/OFF button and remove the mains cable from the socket.
• After the treatment, wash your face with cold water. Now apply a facial cream or face mask. The
open pores allow the active agents to penetrate deep into the skin.
• Allow the device to cool down for 10 minutes. Afterwards, clean the device as described in
Section "8. Cleaning".
8. Cleaning
Prior to cleaning, make sure that the mains plug has been removed from the socket.
• After each use, empty and clean the water collection
container and remove any grease or other residue.
• After cleaning, replace the water collection container in
the device.
• Empty the ionic facial sauna after each use.
• Clean the water tank opening, the nozzle and the base
device with a soft, slightly damp cloth and then wipe
dry.
9. Disposal
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical
and Electronic Equipment).
If you have any queries, please contact the appropriate local authorities.
10. technical data
Model no.
Voltage supply
Output
Protection class
Short operation
FCE 70
220 - 240 V~50/60 Hz
375 W
II /
Max. 20 min
14
Werbung
