Zodiac Genius Installations- Und Bedienungsanleitung Seite 3

current device, complying with the standards and regulations in force in the country
in which it is installed.
• Do not use any extension lead when connecting the appliance; connect the appliance
directly to a suitable power supply.
• Before carrying out any operations, check that:
- The required input voltage indicated on the appliance information plate corresponds
to the mains voltage;
- The mains supply is compatible with the appliance's electricity needs and is correctly
grounded;
- The plug (where applicable) is compatible with the socket.
• In the event of abnormal operation or the release of odours from the appliance,
turn it off immediately, unplug it from its power supply and contact a professional.
• Before servicing or performing maintenance on the appliance, check that it is
powered off and completely disconnected from the power supply.
• Do not disconnect and reconnect the appliance to the power supply when in
operation.
• Do not pull on the power cord to disconnect it from the power supply.
• If the power cord is damaged, it must be replaced by the manufacturer, an authorised
representative or a repair facility
• Do not perform maintenance or servicing operations on the appliance with wet
hands or if the appliance is wet.
• Before connecting the appliance to the power supply, check that the connection
unit or socket to which the appliance will be connected is in good condition and
shows no signs of damage or rust.
• For any component or sub-assembly containing a battery: do not recharge or
dismantle the battery, or throw it into a fire. Do not expose it to high temperatures
or direct sunlight.
• In stormy weather, disconnect the appliance from the power supply to prevent it
from suffering lightning damage.
• Do not immerse the appliance in water (with the exception of cleaners) or mud.
SPECIFIC FEATURES APPLICABLE TO "Pool cleaners"
• The cleaner is designed to operate properly in pool water at a temperature of
between 15°C and 35°C.
• To avoid possible injury or damage to the cleaner, do not operate the cleaner out of
the water.
• In order to prevent possible injury, bathing is prohibited when your cleaner is in the
pool.
• Do not use the cleaner during shock chlorination.
• Do not leave the cleaner unattended for an extended period.
WARNING ON THE USE OF A CLEANER IN A POOL WITH A VINYL SURFACE:
• Before installing your new cleaner, carefully inspect the lining of your pool. If the
liner has eroded in some areas, or if you notice gravel, folds, roots or corrosion
caused by metal beneath the liner, or if you notice that the surface (floor and walls)
is damaged, do not install the cleaner before performing the necessary repairs or
before having the liner replaced by a qualified professional. The manufacturer may
not be held liable in any way for damage caused to the liner.
• The surface of certain vinyl patterned surfaces can wear rapidly and the patterns
disappear on contact from objects such as cleaning brushes, toys, inflatable buoys,
chlorine distributors and automatic pool cleaners. The decoration on some vinyl
surfaces can be scratched or worn by basic friction such as through the use of a
pool brush. The colours of certain patterns can also be erased during use or when
in contact with objects in the pool. The pool cleaner manufacturer may not be held
liable for the erased patterns, wear or scratching of vinyl surfaces, which are not
covered by the limited warranty.
WARNING ON THE USE OF A CLEANER IN A STAINLESS STEEL POOL
• Some stainless steel pools may have very fragile surfaces. The surface of these
pools might get damaged by the basic friction of debris against the surface, for
example caused by the wheels, tracks or brushes of cleaners, including electrical
pool cleaner. The wear or scratching of stainless steel pools are not the liability of
the manufacturer of the pool cleaner and are not covered by the limited warranty.
2
only.