Honeywell OmniClass 2.0 OM15 Installationsanleitung

INSTALLATION GUIDE
Parts
1 – OmniClass Reader
1 – Installation Guide
2 – #6-32 x .375" Phillips machine screws
3 – #6-32 x .375" spanner security screw
2 – 7-pin Terminal connectors for terminal readers
1 – 10-pin Terminal connector
Specification
BASE PART
PRODUCT
NUMBER
OM30/OM32 (R10) 900N
7
OM31/OM33 (RP10) 900P
7
OM15/OM17 (R15) 910N
7
OM16/OM18 (RP15) 910P
7
OM40/OM42 (R40) 920N
7
OM41/OM43 (RP40) 920P
7
OM55/OM57 (RK40) 921N
7
OM56/OM58 (RPK40) 921P
7
1 Communication protocols other than Wiegand or Clock & Data (for control
panels), as well as credential interfaces over BLE (not applicable for 9xxL
models), require an additional hardware module which increases current
by 40mA.
2 Standby AVG - RMS current draw without a card in the RF field.
3 Maximum AVG - RMS current draw during continuous card reads. Not
evaluated by UL.
Bluetooth Specifications
OPERATING TEMPERATURE
-15° to 150° F (-25° to 65° C)
The final product, containing the modular transmitter must be labeled with its own FCC ID and IC ID. If the FCC & IC ID is not visible, when the module is installed inside
another device, then the final assembly label must contain the FCC and IC ID numbers with a statement such as follows: "Contains Transmitter Module with FCC ID JQ6-
ICLASSBTM and IC ID 2236B-ICLASSBTM".
This Installation Guide is for informational purposes only. Honeywell makes no warranties, expressed or implied, in this summary. Company, product names and data used in sample output are fictitious.
Specifications are subject to change without notice.
INSTALLATION GUIDE
All manuals and user guides at all-guides.com
Recommended
• Cable, 5-9 conductor (Wiegand or Clock-and-Data), 4 conductor Twisted Pair Over-All Shield and UL
approved, Belden3107A or equivalent (OSDP)
• Linear DC power supply
• Metal or plastic junction box
• Security tool (for anti-tamper screw) HID 04-0001-03
• Drill with various bits for mounting hardware
• Mounting hardware
• Reader spacer when mounting on or near metal or metal junction boxes - see How to Order Guide
• IP65 Mounting gasket, recommended for outdoor installation
• Back box
CURRENT
INPUT
VOLTAGE (VDC) STANDBY
MAX AVG
AVG
2
60mA 95mA
75mA 100mA
60mA 95mA
5 - 16VDC
75mA 100mA
65mA 95mA
85mA 100mA
85mA 100mA
5.5 - 16VDC
95mA 105mA
4 Peak - highest instantaneous current draw during RF communication.
5 When configured for Bluetooth Operating Range is -13° to 150° F
(-25° to 65° C)
6 Wiegand Cable Lengths:
100 ft (30.5 m) 22 AWG @ 5 - 6.4VDC
500 ft (152 m) 22 AWG @ 6.5 - 16VDC
7 Mobile Enabled Products, see specifications below.
FREQUENCY
2.4 - 2.480 GHz
1
OPERATING
TEMPERATURE
5
PEAK
3 4
Wiegand = 500 ft - 22 AWG (152 m)
200mA
-30° to 150° F
(-35° to 65° C)
220mA
Page 1
PLT-01558, Rev A.1
CABLE LENGTH
6
Communication Lines
300 ft - 24 AWG 91 m)
RS-485 = Max bus length
4000 ft - 24 AWG (1,219 m)
Max length between nodes:
1640 ft - 24 AWG (500m)
UL Reference Number Deciphering
x Reader Colors: K = Black
1
x Wiring: N = Pigtail
2
T = Terminal
5 = 5 meter Pigtail
x Communications: N = No Module
3
R = RS-485 (OSDP)
L = Indala Prox
B = Bluetooth
FCC & IC IDS
FCC-ID: JQ6-ICLASSBTM
IC-ID: 2236B-ICLASSBTM
PLT-01558, Rev A.1
REGULATORY
REF NUMBER
R10Ex x x
1 2 3
RP10Ex x x
1 2 3
R15Ex x x
1 2 3
RP15Ex x x
1 2 3
R40Ex x x
1 2 3
RP40Ex x x
1 2 3
RK40Ex x x
1 2 3
RPK40Ex x x
1 2 3