Gude GHS 500/6TE Originalbetriebsanleitung Seite 29

Technical Data
Holzspalter
Art. No
Service connection
Safety class
Type of protection
Rated power
No-load speed
Hydraulics tank (HLP 46)
Max. hydraulic pressure
Max. splitting uplift
Max. splitting pressure
Workpiece length
Workpiece diameter:
Splitting post
Forward speed
Reverse speed
LxWxH in mm
Weight
Sound power level LWA
The values stated are emission values and as such do not necessarily constitute values which are safe for the
workplace. Although there is a correlation between emission levels and environmental impact levels, whether
further precautions are necessary cannot be derived from this. Factors in uencing the actually present environ-
mental impact level in the workplace include the characteristics of the work area and other noise sources, i.e.
the number of machines and other neighbouring work processes. The permitted workplace values can likewise
vary from country to country. This information is intended to assist the user in estimating hazards and risks.
* The S6-40% indicates a load profile of 4 min load and 6 min idle time
Read and understand the operating
instructions before using the
appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
Persons over 16 years of age can only work on the
appliance. An exception includes youngsters trained
in order to reach knowledge under supervision
of the trainer during occupational education.
In case of any doubts about connection and operati-
on refer please to our customer center
The operating personnel must be adequately trained
in the use, adjustment and operation of the device.
GHS 500/6TE GHS 500/8TE
02051 02052
230 V / 50 Hz 230 V / 50 Hz
F F
IP 54 IP 54
3,0 kW, S6/40%* 3,5 kW, S6/40%*
-1
2820 min 2820 min
3,3 l 3,4 l
200 bar 280 bar
470 mm 470 mm
6 t 8 t
250 - 500 mm 250 - 500 mm
50 - 300 mm 50 - 350 mm
90 x 90 mm 100 x 100 mm
0,03 m/s 0,03 m/s
0,124 m/s 0,124 m/s
860 x 990 x 1500 880 x 1050 x 1500
mm mm
98 kg 115 kg
86 dB(A) 87 dB(A)
Specified Conditions Of Use
The wood splitter has only been designed to split
wood in the fibre direction. Respecting technical
data and safety precautions.
When splitting, it is essential to make sure the split
wood only contacts the checkered sheet of the
bottom plate or the checkered sheet of the splitting
desk.
The machine may only be used if it is fully assem-
bled.
Operation of a machine that is not fully assembled
is strictly prohibited.
The device must not be used without the attach-
ment tables.
It is essential to follow instructions for installation,
operation, repairs, etc. to prevent hazards and
damage.
ENGLISH
GHS 500/8TE
02053
400 V / 50 Hz
F
IP 54
3,0 kW, S6/40%*
-1 -1
2820 min
3,4 l
280 bar
470 mm
8 t
250 - 500 mm
50 - 350 mm
100 x 100 mm
0,04 m/s
0,16 m/s
880 x 1050 x 1500
mm
112 kg
87 dB(A)
25