Electrolux EB6L40SW Benutzerinformation Seite 10

10 www.electrolux.com
7. CLOCK FUNCTIONS
7.1 Clock functions
Clock function
Time of Day
Duration
Minute Minder
7.2 How to set: Clock functions
How to set: Time of Day
- flashes when you connect the oven to the electrical supply, when there was a
power cut or when the timer is not set.
In case of a power cut up to 1 h, the time of day is shown and
that the time is correct and press
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the time.
How to change: Time of Day
In case of a power cut up to 1 h, the time of day is shown and
that the time is correct and press
Step 1
Step 2
How to set: Duration
Step 1
Step 2
Step 3
Application
To set, change or check the time of day.
To set how long the oven works.
To set a countdown. This function has no effect on the
operation of the oven. You can set this function at any
time, also when the oven is off.
- press repeatedly to change the time of day.
, - press to set the time.
After approximately 5 sec., the flashing stops and the display shows the
time.
Set an oven function and the temperature.
- press repeatedly.
, - press to set the duration.
The display shows:
- flashes when the set time ends. The signal sounds and the oven
turns off.
to stop the flashing.
to stop the flashing.
- starts to flash.
.
flashes. Make sure
flashes. Make sure
- starts to flash.