3
Press the mounting brackets together (diagram
SpotClip-II into the cut-out in the ceiling until the 4 support arms
(diagram
) are mounted above the ceiling cut-out.
E
4
Fully fit the 4 retaining lugs
prevent any misalignment of the system at a later stage.
5
Check that the SpotClip-II is correctly fixed in position before fitting
the downlight.
6
Fit the recessed downlight (diagram
downlight instruction manual.
; The SpotClip-II is installed.
7 Maintenance
No special maintenance is required.
8 De-commissioning
Used correctly in accordance with this manual, there is no product
use time limit.
9 Disposal
At end of use, the purchaser or operator must dispose of the product
correctly. This product is manufactured in accordance with current
environmental protection standards.
f Comply with the national directives concerning the disposal
of material.
f Take the product to a collection point or local recycling centre.
f If necessary, contact the local authorities.
Instruction manual • SpotClip-II • 03-2017
(diagram
) in the plasterboard to
3
F
) in accordance with the
G
Maintenance
) and insert the
D
2
7