Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
1 - Decide where the ductwork will run between the hood and the outside.
2 - A straight, short duct run will allow the hood to perform most efficiently.
3 - Long duct runs, elbows, and transitions will reduce the performance of the hood.
Use as few of them as possible. Larger ducting may be required for best performance
with longer duct runs.
4 - The air must not be discharged into a flue that is used for exhausting fumes from
appliances burning gas or other fuels Regulations concerning the discharge of air must
be followed.
Check with the local authority and building codes for exhaust ducting requirements.
5 - Install wall ventulation cap. Connect round ducting pipe to ventulation cap and work
back towards. hood location.
Electrical Connection
Electrical wiring must be done by a qualified person(s) in accordance with all
applicable codes and standards.
Turn off electrical power at service entrance before wiring.
If the supply cord is damaged, it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
Do not use the plug and an extension cord other than the ones initially supplied with
the hood.
Ducting or circulation
The hood draws the cooking fumes
saturated with fumes and odor, through the
grease filters and expels it to the outside
through an outlet pipe, or circulates it back
into the kitchen through carbon filters.
Caution: To reduce the risk of fire, the use of metal
ductwork is preferred. Do not use flammable
material to convey exhaust air.
20
Werbung
