Swegon ESENSA Installationsanleitung Seite 2

Defrost kit
Table of content
1. Installation video
2. General information
3. Control configuration
4. Kit and recommended tools
5. Option location
6. Defrost kit installation
7. Defrost kit connection
1. Installation video
Click here to open link
2.General information
The component of the option will be delivered separately from
the unit and must be installed by the installer.
Electrical cables must be adjusted to the unit. Connect length
to avoid any damage inside the unit.
The defrost kit will be used to continuously measure the need
to defrost the unit and activate this function as required.
3. Control configuration
In addition to installing and connecting the option, configure
the unit's option in the hand controller HMI using the
commissionning manual.
2 www.swegon.com
MULTI.ESENSA.DEFROST.230821
The document was originally written in English.
We reserve the right to alter specifications.