Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Fitting the safety belt
2.
1.
3.
4.
Figure 13: Fitting the safety belt to the seat
Important
When fitting, ensure that the belt catch is facing outwards and the shoulder pad inwards.
The abdominal belt should be detached from the belt catch (3) and the belt adjuster (1).
Abdominal belt
1. Feed abdominal belt through the slot in the seat from the rear and pull it out until the sewn end (2) is
firmly fitted in position.
2. Feed abdominal belt through the belt adjuster (1).
3. Feed abdominal belt through the lower part of the belt catch (3) from the rear.
4. Feed abdominal belt through the belt adjuster (1) from the other direction.
Fasten the other abdominal belt in the same way.
Shoulder belt
Pass the shoulder belt tab (5) through the slot in the seat rear from the front.
Thread the belt stopper (4) into the shoulder belt tab (5).
Pull the shoulder belt forwards until the belt stopper is in contact with the rear part.
Fasten the remaining shoulder straps in the same way.
The shoulder straps can be fastened in three different positions, depending on the height of the child.
MY21K99_01_1.0_25.08.2023
1
2
3
KETTLER Flexbox assembly instructions
4
180°
5
15
Werbung
