Kettler Variante 600 Montage- Und Bedienungsanleitung Seite 38

 Read through these instructions and your
cargo bike's original operating instructions
carefully, particularly the general safety
instructions, before you assemble or use the
Flexbox.
If the notices in the instructions are not observed,
this may lead to serious injury or damage to your
cargo bike or the Flexbox itself.
 Keep the instructions handy for further use.
 If you pass the Flexbox or the cargo bike fitted
with the Flexbox to a third party, ensure that
you give them all the instructions for the bike
and the Flexbox as well.
Manufacturer
KETTLER Alu-Rad GmbH
Longericher Strasse 2
50739 Köln, Germany
Tel.: +49 6805 6008-0
Fax: +49 6805 6008-3098
E-Mail: info@kettler-alu-rad.de
Subject to internal changes.
The information contained in these assembly and
operating instructions are the approved technical
specifications at the time of printing.
Any significant changes will be included in a new
published version of the assembly and operating
instructions. You will find any modifications to
these assembly and operating instructions at:
https://www.kettler-alu-rad.de/de/de/index/
service/downloads.html
Mark-ups
You will find the following stylised forms of
typeface in these assembly and operating
instructions:
Stylised form
Figure 14:
 Triangle
Bullet

Important
 Triangle outline
Table 1: Table header
MY21K99_01_1.0_25.08.2023
Use
Figure caption
Instructions for actions
Bulleted lists
Notice
Addition to notice
KETTLER Flexbox assembly instructions
Pictograms
You will find the following pictograms in the
assembly and operating instructions:
Pictogram
Table 2: Pictograms
Use
Indication of direction in
figures
2