Kettler Variante 600 Montage- Und Bedienungsanleitung Seite 47

KETTLER Flexbox assembly instructions
4L
1
4R
Figure 8: Raising the front wall
 Raise the front wall (1) until it is parallel to the grooves on the two tabs (4L) and (4R).
2
3
4L
1
4R
Figure 9: Screwing the front wall into place
 Close both tabs (4L) and (4R) until they are in contact with the front wall (1).
 Screw both tabs (4L) and (4R) into place with 3 sleeve nuts (2) and 3 countersunk screws [M6x12] (3)
each.
Important
 Fasten countersunk screws with a torque of 6 Nm.
MY21K99_01_1.0_25.08.2023 11